Hangzhou Epsole Machinery Co., Ltd. is one of the most reliable manufacturers and suppliers of energy saving eps shape moulding machine in China. We warmly welcome you to buy high quality energy saving eps shape moulding machine for sale here from our factory. Good service and reasonable price are available.
、
| Machine Type | SMED Shape Moulding machine | ||||
| Model | ESS1214M | ESS1417M | ESS1915M | ||
| Data | unit | ||||
| Overall | mm | 5363*3310*4852 | 5363*3610*5152 | 5363*3710*5352 | |
| Mould size | mm | 800*1300 | 1200*1400 | 1500*1900 | |
| Product high | mm | 350 | 350 | 350 | |
| Move Distance | mm | 1200 | 1200 | 1200 | |
| Cooling | Machine Inlet | DN | 80 | 80 | 80 |
| Mould Inlet | DN | 50 | 50 | 50 | |
| Pressure | bar | 4 | 4 | 4 | |
| Consumption | Kg | 0~6.28 | 0~6.28 | 0~6.28 | |
| Vacuum | Connector | 100 | 100 | 100 | |
| Drainage | L/h | 100 | 100 | 100 | |
| Hydraulic | Motor | Kw | 7.5 | 11 | 11 |
| Capacity | L | 400 | 400 | 400 | |
 |  |
Energy saving machines equip big pipelines and valves, which allows lowpressure and big flow of steam while moulding. Enough steam can be supplied in an instant to reduce cycle time and provide excellent production condition.
The accurate control of steam pressure is a key factor of production efficiency.Currently, most of Chinese machinesaremade of small pipe & valves, thus high-pressure steaming has to be used.
Fully digital PID control to control energy consumption precisely. Multispots heating realizes most equal distribution of steam in the mold chamber. The steam chamber adopts unique thermal insulation material to realize mold cavities' insulation.
Vacuum cooling is used as main cooling instead of water cooling. The purpose of this design is to keep the consumption reduced and water content of products at a low level. In the end, the vacuum cooling could achieve not only energy saving but also working efficiency.
Water mould cooling we can use high temp water and vacuum water we can adopt low temp one.
Air, we use high pressure air 6 bar to driven pneumatic valve movement, and low pressure less than 5 bar for demold.by this way, 70% compressor on and off reduced, we can save electricity bill 30~50%.
Water mould cooling we can use high temp water and vacuum water we can adopt low temp one.
Air, we use high pressure air 6 bar to driven pneumatic valve movement, and low pressure less than 5 bar for demold.by this way, 70% compressor on and off reduced, we can save electricity bill 30~50%.
Hot Tags: energy saving EPS shape moulding machine, China, manufacturers, suppliers, factory, price, vacuum, for sale, eps fish box making machine, Eps Foam Mould Machine, eps shape moulding machine, Eps Styrofoam Shape Moulding Machine, eps shape machine for polystyrene box, shape moulding machine