Hangzhou Epsole Machinery Co., Ltd. is one of the most reliable manufacturers and suppliers of oscillating knife cutting machine eps foam in China. We warmly welcome you to buy high quality oscillating knife cutting machine eps foam for sale here from our factory. Good service and reasonable price are available.

Oscillating Knife Foam Cutting Machine | Cold CNC Cutter
Powered by Cold-Cutting Oscillating Knife Technology. Zero thermal heating, zero melting: no yellowed or carbonized edges, no hardened skin that scratches delicate lenses, and no heat-decomposition fumes during cutting. Plunge-cut closed micro-holes, narrow slots, and stepped blind cavities directly anywhere on EPS, EPP, EPE, EVA, and laminated composite foam sheets without lead-in cuts.
Industry Solutions
Choose the plan that suits you best.
100% Mechanical Cold Cut: Zero Heat-Affected Zone (HAZ), no charring, no melted beads, no thermal smoke or odor
01
Imported High-Frequency Knife Head: Up to 【12,000–18,000】 strokes/min for vertical, burr-free sidewalls
02
Closed-Loop CNC Servo Platform: 【±0.05 / ±0.1 mm】 positioning accuracy; direct plunge-cutting of closed holes
03
Modular Tool Head: Oscillating knife + pneumatic knife + bevel V-cut tool + routing spindle + punch module
04
Why High-End Electronics, Medical & Optics Buyers Reject Hot-Wire-Cut Foam Inserts
[Symptom] High wire temperature yellows or blackens white/colored foam edges and leaves a hard, fused crust upon cooling.
[Consequence] When cushioning optical lenses, precision sensors, anodized housings, or medical devices, that hardened crust scratches delicate surfaces-triggering batch rejection.
[Symptom] Modified foams, flame-retardant grades, EVA, and laminated foams release thermal-decomposition fumes when melted, trapping acrid odors inside the foam cells.
[Consequence] Once sealed inside instrument flight cases or retail boxes, the pungent smell hits the end user upon unboxing-failing brand audit standards.
[Symptom] Because a hot wire is tensioned end-to-end, cutting an internal cavity requires slicing a lead-in slit from the outer edge.
[Consequence] The lead-in slit weakens structural cushioning and requires messy manual gluing. For dense pin-holes (<10 mm) or non-through stepped blind cavities, hot wire simply cannot process them.
[Symptom] Thermal shrinkage along the kerf varies with foam density and feed speed, while corner deceleration melts oversized craters.
[Consequence] Cavity tolerances drift from piece to piece-parts rattle loosely or fail to fit into the outer case.
[Your Bottom Line] High-mix, short-run orders with tight lead times. Paying for steel-rule dies on every new insert eats into margins, takes 3–5 days per die, and scraps the tool whenever the client revises a drawing.
[Our Solution] Dieless Digital Cold Cutting: import the DXF file and cut the first article in 3 minutes. Ship short-run custom orders the same day while automatic nesting saves 【5%–15%】 in foam sheet waste.
[Your Bottom Line] Strict OEM quality audits: zero burnt edges, zero chemical odor inside sealed cases, zero foam dust on optical lenses, and tight tolerances on micro sensor slots.
[Our Solution] Pure mechanical cold blade + milling/punching combo head: clean, soft sidewalls with closed micro-holes and stepped blind cavities finished in one setup. Send your toughest foam sample or CAD file-we will run a free trial cut and send back macro inspection video for your QA team.
|
Item |
Unit |
Parameter |
|
suitable for block size |
mm |
4000*2400*1200 |
|
axis |
2(x,y) |
|
|
Drawing & control |
Dell Laptop |
|
|
driving system |
Step motor |
|
|
sum of hot wire |
piece |
43850 |
|
specification of hot wire |
mm |
0.2-0.8 |
|
cutting speed |
m/min |
0.3-1 |
|
connected load |
Kw |
10.3 |
|
power |
V/Hz |
AC 220/50 |
|
contour size |
mm |
4370*3000*2500 |
|
weight |
Kg |
2000 |

FAQ

Q1: Will oscillating knife cutting cause bead tear-out on low-density EPS foam?
Q2: What is the maximum cutting thickness? Can it slice 1.2 m foam blocks?
Q3: How do you process non-through blind cavities or stepped pockets without gluing layers?
Q4: How long do the tungsten-carbide blades last, and what is the replacement cost?
Q5: Is the control interface in English? Can operators without G-code experience run it?
Q6: Will adhesive-backed or fabric-laminated foam stick to the blade?
Hot Tags: oscillating knife cutting machine eps foam, China, manufacturers, suppliers, factory, price, vacuum, for sale, Waste Steam Recycler, Oscillating Knife Cutting Machine Eps Foam, 3d Foam Cutting Machine, Hot Eps Foam Cnc Cutting Machine, EPS hot wire cutter, Cnc Block Cutting Machine


