Normal filling guns(Smooth type and Screw type)
Performance of two types:
Filling gun exploded view: feeder head + feeder pressure plate + feeder pressure plate sealing ring + feeder body + piston rod + cylinder shell + tee
Products’ Common Features:
It has a simple structure, and easy to maintain, and has a good material return effect. The phenomenon of muzzle blasting is improved, and the product quality is more stable. It includes many advantages such as not easy to block, not easy to stick to the moulds, and easy to clean. The specifications of the material gun can also be customized according to the different needs of customers.
Products’ Different Features:
Normal screw filling gun adopts threaded form, which improves the adaptability with the mold during use, and the gun head is not easy to fall off. However, the screw material gun will easily cause the threaded part to rust and become unusable.
Specifications:
|
Specification |
D |
d |
L |
Diameter |
mark |
|
20 |
12 |
80;100;120;150; 180;200;230... |
32 |
1. When ordering a threaded rod feed gun, M must be added before the model number; 2. The length is 150; 180 is the common type; 3. Feed air duct interface 1/4 |
|
|
22 |
14 |
32 |
|||
|
25 |
16 |
32 |
|||
|
26 |
16 |
32 |
|||
|
27 |
16 |
32 |
|||
|
28 |
20 |
32;40 |
|||
|
30 |
20 |
32;40 |
|||
|
32 |
20 |
32;40 |
|||
|
35 |
20 |
32;40 |
|||
|
36 |
20 |
32;40 |
How to maintain the failure of the material gun?
The main purpose of the filling gun is to feed the material. It has stable performance and high work efficiency. The following is about the maintenance and daily maintenance of the filling gun.
1. Maintenance of feeder
1. Before use, it is necessary to carefully confirm whether the material gun is installed correctly
2. Regularly lubricate the relevant parts of the material gun to confirm whether it is flexible
3. Confirm whether the main internal parts have entered large particles of impurities or internal parts are loose (shake the material gun with both hands)
4. Replace the inner sealing ring of the material gun in time
Due to the overall design of the feeder is simple, the daily maintenance of the feeder is not very complicated, and it does not need to spend too much energy, only simple maintenance is required. Hope that each feeder can have a longer service life
Detail of inner seal
Complete set of sealing rings for filling gun: 1 sealing ring for pressure plate of feeder+ 2 buffer pads + 1 piston ring + 2 sealing ring