In order to properly store the EPS cutter to ensure its performance and service life, you can refer to the following suggestions:
Storage environment
1. Dry environment: Store the cutter in a dry environment and avoid moisture. A humid environment may cause metal parts to rust and electronic components to get damp.
2. Good ventilation: Make sure the storage location is well ventilated and avoid the cutter being in a confined space for a long time, which can prevent the formation of mold and odor.
3. Avoid direct sunlight: Place the cutter in a place away from direct sunlight to prevent ultraviolet rays from damaging the surface of the device.
Physical protection
1. Dust cover: Cover the cutter with a dust cover or cloth to prevent dust and impurities from entering the interior of the device.
2. Stable placement: Place the cutter on a stable ground to avoid tilting or tipping over. If possible, it is best to place it in a dedicated shelf or cabinet.
3. Avoid heavy pressure: Do not stack heavy objects on the cutter to avoid crushing the device or causing deformation.
Regular inspection
1. Regular cleaning: Even if it is not used frequently, the cutter should be cleaned regularly to remove dust and dirt on the surface.
2. Check the wires and plugs: Regularly check the wires and plugs of the cutter to make sure they are not damaged or loose. If there is any damage, they should be replaced or repaired in time.
3. Lubricate moving parts: For cutters with moving parts, such as slides and bearings, lubricating oil should be added regularly to ensure their smooth operation.
Safety precautions
1. Disconnect the power supply: Before storing the cutter, be sure to disconnect the power supply to prevent accidental electric shock.
2. Clean the workbench: Before storing the cutter, the residual foam chips and other debris on the workbench should be cleaned to keep the equipment clean.
The above suggestions can effectively extend the service life of the EPS cutter and ensure that it can work properly when needed.