The solution to the broken wire of CNC cutting machine

The solution to the broken wire of CNC cutting machine
1. Re-adjust the guide wheel. When tightening the wire, use the tensioning wheel to tighten the effect. Improper use of tools is not allowed.
2. Choose normal cutting material and cutting line during processing, which can greatly reduce deformation
3. Generally, when the cutting is almost finished, use a magnet to hold the workpiece to prevent the electrode wire from being broken.
4. Check whether the electrode wire is in the guide wheel and the wire retaining rod, whether the electrode wire is stacked or not, check whether the rotation of the wire storage cylinder is flexible, check whether the conductive block and the wire retaining rod have cut groove marks, etc.
Specializing in the production of CNC cutting, the CNC foam cutting machine we produce adopts a fully automatic CNC control system, which runs smoothly, can self-diagnose and self-adapt, and can work without interruption. Graphics can be cut directly, and the cutting files can also be directly imported for cutting with a U disk. The operation interface is intuitive, and it follows the cutting path and various states of the machine such as limit, alarm, and various operating values.