The EPS molding machine has the ability to mold plastic products with complex appearance, compact size or texture and metal inserts in one step. It is widely used in various fields such as national defense, electromechanics, automobiles, transportation, building materials, packaging, agriculture, culture, education, health and people's daily life. The injection molding process has good adaptability to various plastics, high production capacity and easy automation. With the rapid development of today's plastics industry, EPS molding machines occupy an important position in quantity and variety, and have become one of the fastest growing and largest models in plastic machinery.
The working principle of the EPS molding machine is similar to that of a syringe. It is a process in which the plastic in a plasticized molten state (i.e., a viscous flow state) is injected into a closed mold cavity through the thrust of the screw (or plunger), and the product is obtained after solidification and molding. Injection molding is a cyclic process, and each cycle mainly includes: batching, melt plasticization, pressure injection, mold filling cooling, mold opening and removal. After taking out the plastic parts, close the mold and enter the next cycle.
EPS foaming machine cutting machine is mainly used as a device for cutting and processing foam, sponge and other chemical materials required.
At present, this type of laser is mainly used for cutting. Since laser beam precision cutting is not easy to deform, the cutting surface is smooth and the edges are clear, it has been applied in various fields. Of course, some faults will occur in the process of using the EPS foaming machine cutting machine, and maintenance is required from time to time.
EPS molding machine mechanical method: With the help of strong stirring, a large amount of air or other gas is introduced into the liquid plastic. In the industrial field, urea-formaldehyde foam is mainly produced in this way. It can be used for thermal insulation of thermal insulation materials and for scenery in film and television dramas, such as our common artificial snowflakes.
To prevent accidents or machine damage, the following principles must be observed during the inspection of the EPS molding machine:
1. When the EPS molding machine fails, disconnect the power supply immediately and stop the machine.
2. When the EPS molding machine cannot be used normally, please refer to the relevant manual and take correct measures. Turn off the power before checking and replacing components.
3. The parts removed during the inspection should be replaced with the same new parts in the same position. The instruments used during the inspection must be calibrated.
4. Do not place flammable or metal objects in electrical cabinets or junction boxes;
5. Check cables and wires regularly to prevent leakage or electric shock.